Category : A/V-Receiver
Brand : Kenwood
General
Connections
Tech nical data
AUDIO part:
Rated power (IEC /NF) between 63Hz and 12,500Hz at kges = 0.7% at 8 ohms..... 95 W + 95 W rated power (DIN) 1 kHz at 4 ohms..... 80 w + 80 W noise voltage distance (DIN) at 50 mW output power PHONO.................56 dB TAPE, CD, AUX, VIDEO.................56 dB
Input sensitivity/impedance PHONO...................2.5mV/47 kohms TAPE, CD, AUX, VIDEO...................200 mV/47 kohms
Graphic Equilibrator center frequencies........60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, 15 kHz control range............+/- 12 dB
VIDEO part:
VIDEO inputs 1,2,3....1 Vs-s, 75 Ohm unbalanced
VHF receiver:
Receiving frequency........87.5MHz and 108 MHz antenna impedance.......75 Ohm unbalanced input sensitivity (DIN) MONO....................1.1 µV
STEREO..................40 µV
Noise Voltage distance (IEC -A)
MONO....................68 dB
STEREO..................61 dB
Total harmonic distortion (DIN) 1kHz MONO....................0.2% STEREO..................0.3% Frequency response 30 Hz - 15,000 Hz ......+ 0.5 dB, - 2.5 dB stereo channel separation 1kHz....................40 dB capture ratio......2.0 dB selectivity (DIN)......64 dB mirror frequency attenuation.80 dB interference frequency attenuation....90 dB MW receiver: Reception range.........531 kHz - 1.602 kHz input sensitivity....................10 µV (400 µV/m) interference voltage distance....50 dB total harmonic distortion.........0.3% Selectivity ...........25 dB
General : Power consumption.......200 W mains output............. Wired x1
Special equipment
Other models of the same series: