Kenwood KD-5070 specifications

Brand : Kenwood

General

connectors

Tech nical data

special features

drive: direct drive
Motor: 20-pole, brushless, DC servo motor
speed: 33 1/3 U/min, 45 U/min
speed regulation: ± 3 %
flutter: less than 0.025% WRMS
rumple-to-noise ratio: - 73 dB (DIN-weighted)
platter: 310mm Aluminium alloy diecast
- plate weight: 1.5 kg
- moment of inertia: 330 kg/cm2
mode of operation: fully automatic
tone arm: J-shaped tube
- Effective length: 225 mm
- Overhang: 15 mm
- tracking force: 0 to 3 g
  - With the additional weight: 3 - 10 g
pickups: no

press release for the "Hi-Fi '78" in Düsseldorf, Germany:
- 85e9ff08f186d29daf40875f980c2e43 KD-5070

report of the "Hi-Fi Studio" to 85e9ff08f186d29daf40875f980c2e43 KD-5070 / KD-5077:
The two turntable 85e9ff08f186d29daf40875f980c2e43 KD-5070 and 85e9ff08f186d29daf40875f980c2e43 KD-5077 came on the market in 1978. Tech nically, they are the same, the difference is in the execution of the frame. The KD 5070 has a massive ARCB frame (Anti Reson ance Compression Base), consisting of limestone particles, glass powder and unsaturated resin. The KD-5077 has a veneered wooden frame. The drive is handled by a servo-controlled 20-pole brushless DC motor. This guarantees the most minimal speed fluctuations and speed deviations. Variable speed control allows precise speed adjustment. The stroboscope helps with an exact speed setting. Manual or fully automatic operation is possible. The precision tonearm is equipped with an anti skating correction and a headshell according to the SME standard. The tonearm lift is viscose damped and lowers the arm gently. Both turntables are of the top class.