Kenwood KA-5002 specifications
Category : Integrated amplifier
Brand : Kenwood
General
connectors
Technical data
special features
http://audio.mezei.fr/pages/KenwoodKA5002.html
- manufacturer: Kenwood
- model: KA-5002
- year of construction: 1971 - 1973
- Made in Japan
- color: silver, wood side panels
- type: amplifier
- power consumption: 200 W at Full scale, 15 W without Signal
- dimensions (WxHxD): 408 x 134 x 280 mm
- weight: 9 Kg
- factory price approx.: 65000 Yen (Japan, 1971), 220 US$ 900 DM
- number of inputs:
- input sensitivity:
- Phono 1 MM: 2.5 mV, switchable 30 ohms, 80 ohms
- Phono 2 MM/MC: 2.5 mV, 50 kOhm s, switchable 0,06 mV, 200 Ohm
- microphone: 2.5 mV, 50 kOhm s
- Tuner: 200mV, 100 kOhm
- AUX 1,2: 200mV, 100 kOhm
- Tape Play A, B: 200mV, 100 kOhm
- Main In: 1 V, 50 kOhm
- number of outputs:
- outputs:
- Tape Rec A, B: 200mV
- DIN: 40mV
- Dubbing: 200 mV
- Pre-Out:
- headphone: Yes, 6.3 mm Jack
- connections for 2 pairs of Speakers (A, B, and A+B)
- input sensitivity:
- Phono 1 MM: 2.5 mV, switchable 30 ohms, 80 ohms
- Phono 2 MM/MC: 2.5 mV, 50 kOhm s, switchable 0,06 mV, 200 Ohm s
- microphone: 2.5 mV, 50 kOhm s
- Tuner: 200mV, 100 kOhm
- AUX 1,2: 200mV, 100 kOhm
- Tape Play A, B: 200mV, 100 kOhm
- Main: 1 V, 50 kOhm
- outputs:
- Tape Rec A, B: 200mV
- DIN: 40mV
- Dubbing: 200 mV
- Pre-Out:
- headphone: Yes, 6.3 mm Jack
- connections for 2 pairs of Speakers (A, B, and A+B)
- DIN: 40mV
- Dubbing: 200 mV
- the duration of the performance (total harmonic distortion)
- 8 Ohm : 2 x 30 W (RMS , 20Hz...20kHz, 0.08% THD), 2x 50W (8 ohms, 1kHz)
- 4 Ohm s: 2x60 W; 2x 48 W (1kHz)
- Dynamic power
- 8 Ohm s: Total 120 W IHF (= 2x 60 W)
- 4 Ohm s: Total 150 W IHF (= 2x 75 W)
- Total harmonic distortion: 0.5% THD at rated power of 20 - 20,000 Hz
- Attenuation factor: 45 at 8 ohms, 90 at 16 ohms
- Frequency response: 20 - 50,000 Hz
- Signal-to-noise ratio:
- Phono 1.2: 65dB (MM) < ul>
- Phono 2, 0.06mV: 45 dB (MC = Low position = Impedance 200 Ohm )
- Microphone: 67 dB
- Aux, Tuner, Tape Play: 77dB
Tone Control - Bass: ±10 dB at 100Hz
- Treble: ± 10 dB at 10kHz
Loudness: + 8 dB at 100 Hz, + 3 dB at 10 kHz High Filter : +12dB/Oct. at 7kHz Low Filter : +12dB/Oct. at 80Hz Muting: 0 dB, - 20 dB- 8 Ohm : 2x30 W (RMS , 20Hz...20kHz, 0.08% THD), 2x 50W (8ohm, 1kHz)
- 4ohm: 2x60w; 2x 48W(1kHz)
- 8ohm: Total 120W IHF (=2x 60W)
- 4ohm: Total 150W IHF (=2x 75W)
< ul>
Phono 1.2: 65dB(MM) - Phono 2, 0.06mV: 45 dB (MC = Low position = Impedance 200 ohms)
Microphone: 67 dB Aux, Tuner, Tape Play: 77dB- Phono 2, 0.06mV : 45 dB (MC = Low position = impedance 200 Ohm )
- Bass: ± 10 dB at 100Hz
- Treble: ± 10 dB at 10kHz
- Input for Phono MC (at that time there were almost no MC systems yet!)
- in - and outputs, for 4-channel operation
- Pre - and power amp separable
- control switch for Balance control (Zero Balance)
- Mono Center channel output
- Other models from the same series:
- Corresponding Tuner
- Kenwood KT have been offered-3000 (according to the current source location will probably only in Japan):
- Kenwood KT-50 00
- Kenwood KDC-7000 (previous model)
- Kenwood KT-7001
- image: Kenwood Combi-KA-5002 / KT-5000
- Device performance in good-old-hifi [1]
- External Link: website "Audio Heritage, Japan": [2]
Comment:
Comment box:
Kenwood KA-5002 relate