JVC QL-A7 specifications
Category : Record player
Brand : JVC
JVC Stereo turntable QL-A7
General :
Tech nical data:
arm
scanning system:
features:
- manufacturer: JVC (Japan)
- TYPE: quartz-controlled turntable with direct drive (semi-automatic)
- size with the hood closed (HxWxD): 16.5 x 48,1 x 40.3 cm
- power: 220 V, 50 Hz, 19 watts (Europe)
- weight: 12 Kg
- price:
- Motor: 12 - pole 24 - slot, DC servo motor
- drive system: direct drive
- speeds: 2, ( a 33.33 and 45 rpm )
- constant velocity fluctuation: 0,025 % (WRMS )
- to-Noise ratio: 63 dB (IEC -B)
- rumple voltage: 73 dB (DIN B)
- speed detector: frequency generator
- starting torque: 1 kg - cm
- start-up time: less than 1.4 s
- quick stop: below 1.6 s
- speed deviation: 0,002 %
- Drift per hour: 0.0001 to % /h
- plate: 31.3 cm
- type: TH - tonearm (Tracing Hold System)
- Effective length: 245 mm
- Overhang: 15 mm
- pad print area: 0 - 3 g
- Acceptable cartridge weight with a System: to 14.5 - 25.5 g (carrier system 10 g)
- height range: 42,4 - 50.0 mm
- type: vibratory solenoid (MD-1025)
- sampling needle: 0.3 x 0.7 mm diamond for DT-Z1 TE
- DT-Z1 TE for Stereo
- 4DT-Z1S for discrete 4-channel/Stereo playback
- Optimum tracking force: 1.5 - 2.0 g
- output: 3 mV (1 khz)
- frequency response:
- DT-Z1 TE: 10 - 25,000 Hz
- 4DT-Z1 S: 10 - 45,000 Hz
- channel separation: better than 25 dB (1 khz)
- DT-Z1 TE: 10 - 25,000 Hz
- 4DT-Z1 S: 10 - 45,000 Hz
- Single-Puck: Yes
- Anti-Skating knob: Yes
- tonearm static suspension
- photo-kinetic limit switch altungs-automatic,
- sensor buttons for speed dial and fast stop,
- cardan suspension with TH - arm compensation balance with a new Gimbal,
- aluminum-head sled with quick-action clamping lock,
- tonearm height adjustment
- parallel, oil-damped tonearm lift,
- driven by high-quality quartz precise servo motor,
- control of the speed through the illuminated crystal frequency synchronized stoposkop display,
- built was almost wear-free electronics,
Comment:
Comment box:
JVC QL-A7 relate