Grundig V 35 specifications

Brand : Grundig

General

connectors

Technical data

special features

number of inputs: 4 x input RCA, 1x Phono, RCA with ground screw
Phono input sensitivity (for rated power): <= 2 mV/47 kω; Max. Input voltage (overload resistance): >= 100mV
Tuner, tape, CD, monitor: Input sensitivity (at rated power): <=200mV/>=200kΩ; Max. Input voltage (Overload): >=10V
number of outputs: 2x Line RCA, 2x2 speaker output terminal connectors, 1x headphone big Jack (6.3 mm)
- LS1 or LS2 4 - 16Ω
- LS1 and LS2 of 8 - 16Ω
- headphone: 5-2000 Ω

continuous output/rated output (in the case of harmonic distortion <=0,015%)
- 8 Ohm s at 1 pair of speakers:65W
- 8 Ohm to 2 pairs of Speakers pairs: 100W
- 4 Ohm to 1 pair of speakers: 100W
dynamic performance/music performance
- 8 Ohm s at 1 pair of speakers:75W
- 8 Ohm 2 Speaker: 140W
- 4 Ohm to 1 pair of speakers: 140W
total harmonic distortion: At rated output -1dB: <=0,015%
damping factor: 4Ω, R=160mΩ: 25
frequency response:
- Phono: 20Hz - 20kHz
- Tuner, Tape, CD, Monitor: 10Hz - 40kHz
signal-to-noise ratio, Signal-to-noise ratio; the RMS value to peak value according to DIN 45405:
based on nominal capacity:
- Phono: >=73/68 dB
- Tuner, Tape, Monitor, CD: >=93/88 dB
based on 2x50W at 4Ω: >= 66/61 dB
stereo channel separation: Maximum Crosstalk L-R (1kHz): Phono: 68 dB; Tuner, Tape, CD, Monitor: 64 dB
sound-control:
- Bass: slider
- height: slider
Loudness: on the Line button can be switched off
High Filter : -
Low Filter (Subsonic): -
Mute: on the monitor button
Direct/Line-Straight: available

Monitor the entrance to the "online-Listen to" tape recordings of devices with monitor playback head (so-called tape monitor), which is designed as a "normal" RCA input