Grundig R 400 specifications

Category : Receiver

Brand : Grundig

General

Connections

Technical data

Amplifiers

Tuners

Special equipment

Other models of the same series:

number of inputs:
- Tape 1 200 mV/220 643961b8da111c0a15d770a1109a86d4 (DIN)
- Tape 2 200 mV/220 643961b8da111c0a15d770a1109a86d4 (DIN) on the front
- Phono 2.2 mV/47 K643961b8da111c0a15d770a1109a86d4 (DIN and RCA)
- antenna (coax 75 and Flat 300-643961b8da111c0a15d770a1109a86d4)
number of outputs:
- Tape 1 (DIN)
- Tape 2 (DIN) on the front
- speaker (DIN)
- headphone (6.3 mm Jack)

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4: 2x 30 watts (DIN)Jack)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 50 watts (DIN)
total harmonic distortion: <= 0,03%
damping factor: 30
frequency response: 10 - 40,000 HZ -3 dB
signal-to-noise ratio: >= 82 dB
stereo channel separation: >= 52 dB
control:
- Bass: Yes
- height: Yes
Loudness: no
High Filter : no
Low Filter (Subsonic) sound: no
Mute: no
Direct/Line-Straight: no

receiving: FM, KW, MW, LW
frequency:
- FM: 88 - 108 MHz
- KW : 6 - 16 MHz
- MW : 520 - 1600 KHz
- LW : 150 - 350 KHz
frequency response: 10 - 16,000 Hz -3 dB
input sensitivity: FM: 1,5/55 µV (Mono/Stereo), KW: 11 µV, MW: 10 µV, LW: 7 µV
total harmonic distortion: <= 0,5%
signal-to-noise ratio: 63/60 dB (Mono/Stereo)
channel separation: >= 40 dB
selectivity: 46 dB
frequency selection: 2 dB
in addition to the wave selection:
mirror frequency attenuation: > 32 dB
ZF-loss: > 90 dB
ON-suppression: 51 dB
output level:
RDS: no
station memory: no