Grundig MV 100 specifications

Brand : Grundig

General

connectors

Technical data

special features

With the exception of the case size is identical successor:

number of inputs:
- Phono DIN and RCA 2 mV /47 K ohms
- 2x Tape DIN 150 mV /220 kilo-ohms (including 1 on the Front)
- Tuner DIN 150 mV / 220 kilo-ohms
number of outputs:
- 2x Tape DIN (1 on Front)
- headphones
- 2x speaker DIN

continuous power
- Only LS1 or LS2:
  - 8 Ohm : 2 x 14 Watt sine
  - 4 Ohm : 2x 22,5 Watt sine
- LS1 + LS2, 8 Ohm s:
  - 4 x 11.25 watts of sine
dynamic performance
- Only LS1 or LS2:
  - 8 Ohm : 2 x 20 watts
  - 4 Ohm : 2 x 40 watts
- LS1 + LS2, 8 Ohm s:
  - 4 x 20 watts
total harmonic distortion (at rated power):
- =< 0,07% at 1 kHz
- =< 0.25% for 40 Hz -20 kHz
Intermodulation distortion (at rated output): =< 0,17%
damping factor (4 Ohm s): 40
frequency response:
- TA 25 - 30 kHz - 3 dB, Tape, Tuner: 15 - 70 kHz -3 dB
performance range: < 10 Hz . . . > 100 kHz
signal-to-noise ratio:
- (RMS /peak value according to DIN 45405) at rated power
  - Phono => 73/68 dB
  - Tuner, TB => 93/89 dB
- based on 2 x 50 mW at 4 Ohm s
  - Phono => 67/63 dB
  - Tuner, TB => 69/64 dB
stereo channel separation:
- Tuner: => 82 dB
- TB1: => 78 dB
- TB2: => 82 dB
- TA/Phono =>70 dB
sound-control:
- Bass: +14/-15 dB at 40 Hz
- height: +13/-13 at 16 kHz
Balance: -13/+2.5 dB
Loudness: Yes
High Filter : no
Low Filter (Subsonic): no
Mute: no
Direct/Line-Straight: no

(RMS /peak value according to DIN 45405) at rated power
- Phono => 73/68 dB
- Tuner, TB => 93/89 dB
based on 2 x 50 mW at 4 Ohm s
- Phono => 67/63 dB
- Tuner, TB => 69/64 dB