Fisher RS-1052 specifications

Category : Receiver

Brand : Fisher

General

connectors

Technical data

amplifier

Tuner

special features

number of inputs:
- 1x Phono: 2 mV / 50 K-ohms
- 2x Line In: 150 mV / 100 k643961b8da111c0a15d770a1109a86d4
- antenna
number of outputs:
- 2x Line Out: 150 mV / 1 k643961b8da111c0a15d770a1109a86d4
- headphone (6.3 mm Jack, front)
- 2 pairs of Speakers

continuous power output (DIN)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 35 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 55 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 2x 35 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 80 W
total harmonic distortion: 0.2% (at nominal power)
damping factor:
frequency response:
- 20 - 30,000 Hz (±1 dB)
- performance range: 7 - 30,000 Hz
signal-to-noise ratio: (external voltage)
- Phono: 60 dB
- Line In: 70 dB
stereo channel separation:
sound-control:
- Bass: ±10 dB at 100 Hz
- height: ±10 dB at 10 kHz
Loudness: Yes
High Filter : 5 kHz
Low Filter (Subsonic): no
Mute: FM Muting
Direct/Line-Straight:

channels:
frequency:
- FM: 87.5 - 109 MHz
- MW: 515 - 1.700 kHz
frequency response:
input sensitivity:
- FM: 1,7 µV (DIN, Mono)
- FM: 4,8 µV / 18,9 dBf (IHF, Stereo)
- MW: 300 µV/m (IHF)
total harmonic distortion:
- FM: 0,2% (Mono), 0,4% (Stereo)
- MW: 0,3%
signal-to-noise ratio:
- FM: 68 / 66 dB (Mono/Stereo)
- MW: 55 dB
channel separation:
- FM: 40 dB
selectivity:
- FM: 65 dB
- MW: 43 dB
frequency selection:
- FM: 1 dB
in addition to the wave selection:
mirror frequency attenuation:
- FM: 56 dB
- MW: 48 dB
ZF-attenuation:
ON-suppression: 55 dB