Fisher 202 specifications

Category : Receiver

Brand : Fisher

General

connectors

Technical data

amplifier

Tuner

special features

number of inputs:
- Phono (MM): 1.5 mV / 50 K-ohms
- Aux 1, 2: 105 mV / 100 k643961b8da111c0a15d770a1109a86d4
- Tape Play: 105 mV / 100 k643961b8da111c0a15d770a1109a86d4
- Tape Play DIN: 105 mV / 100 k643961b8da111c0a15d770a1109a86d4
number of outputs:
- Tape Rec: 105 mV / 2.2 K-ohms
- Tape Rec DIN: 4 mV / 10 k643961b8da111c0a15d770a1109a86d4
- headphone: 5 V, 100 643961b8da111c0a15d770a1109a86d4s
- 2 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 25 W
- 4 643961b8da111c0a15d770a1109a86d4:
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.05 %
damping factor: 50 (8 643961b8da111c0a15d770a1109a86d4)
frequency response: 10 Hz - 50 KHz
signal-to-noise ratio:
- Phono: 65 dB
- Tape, Aux: 85 dB
control:
- Bass: ± 10 dB at 100 Hz
- treble: ± 10 dB at 10 kHz
Loudness of the sound: + 8 dB at 100 Hz, + 4 dB at 10 kHz
High Filter : no
Low Filter (Subsonic): no
Mute:

receiving: FM, MW, LW
frequency:
- FM: 87.5 - 108 MHz
- MW: 520 - 1605 kHz
- LW: 150 - 350 kHz
Input sensitivity:
- FM Mono: 0.9 µV
- FM Stereo: 4,0 µV
- MW: 300 µV
- LW: 700 µV
total harmonic distortion:
- Mono: 0,2 %
- Stereo: 0,5 %
frequency response: 20 - 15,000 Hz - 1 dB
signal-to-noise ratio:
- Mono: 65 dB
- Stereo: 60 dB
channel separation: 65 dB
selectivity: 65 dB
frequency selection: 1.2 dB
in addition to the wave selection: 75 dB
mirror frequency attenuation: 56 dB
ZF-loss: 80 dB
ON-suppression: 56 dB