Denon DRA-1035 R specifications

Category : Receiver

Brand : Denon

General

Connections

Technical data

Amplifier

Tuner

Special equipment

Phono MM: 2.5mV / 47 k643961b8da111c0a15d770a1109a86d4 or 0.2mV/100 643961b8da111c0a15d770a1109a86d4
CD: 150 mV / 23 k643961b8da111c0a15d770a1109a86d4 (direct switch: on) or 47 k643961b8da111c0a15d770a1109a86d4 (direct switch: off)
Video: 150 mV / 23 k643961b8da111c0a15d770a1109a86d4 (direct switch: on) or 47 k643961b8da111c0a15d770a1109a86d4 (direct switch: off)
Tape 1/2, VCR 1/2: 150 mV / 23 k643961b8da111c0a15d770a1109a86d4 (direct switch: on) or 47 k643961b8da111c0a15d770a1109a86d4 (Direct -Switch: off)
VDP: 150 mV / 23 k643961b8da111c0a15d770a1109a86d4 (direct switch: on) or 47 k643961b8da111c0a15d770a1109a86d4 (direct switch: off)
Main-In 1 V /10 k643961b8da111c0a15d770a1109a86d4

rated
- 8 643961b8da111c0a15d770a1109a86d4: 2 x 130 watts (20Hz - 20 kHz, 0,015% THD)
- 4 643961b8da111c0a15d770a1109a86d4:
peak performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4:
- 2-643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: 0.006% of (- 3 dB at nominal power 8 643961b8da111c0a15d770a1109a86d4)
damping factor:
power bandwidth (IHF): 5 Hz - 40 kHz (8 643961b8da111c0a15d770a1109a86d4s, 0.05% THD)
frequency response: 20 Hz - 50 kHz +/- 1.5 dB (b. 1 W)
output impedance: 0.1 643961b8da111c0a15d770a1109a86d4 (b. 1 kHz)
signal-to-noise ratio: 75/82/105 dB (Phono MC/Phono MM/high level)
stereo channel separation:
sound-control:
- Bass: 100 Hz +/- 10 dB
- treble: 10 kHz +/- 10 dB
Loudness (variable): depth 50 Hz, + 10 dB, 10 kHz + 5 dB (In the case of setting VARIABLE LOUDNESS "10")
High Filter : No
Low Filter (Subsonic): no
Mute: Yes
Direct/Line-Straight: Yes

receiving: FM, MW
frequency:
- FM: 87.5 - 108 MHz
- MW: 520 - 1710 kHz
frequency response: 20 Hz - 15 kHz (+/- 0.5 dB)
usable sensitivity:
- FM: 0.9 µV
- MW: 18 µV
input sensitivity 50 dB SNR (75 643961b8da111c0a15d770a1109a86d4 IHF):
- Mono: 1.5 µV
- Stereo: 20 µV
total harmonic distortion: Mono: 0,06% / Stereo size: 0.09%
signal-to-Noise ratio:
- FM: Mono: 86 dB / Stereo: 82 dB
- MW: 55 dB
channel separation: 55 dB (1kHz Wide)
selectivity: 55 dB (+/- 300kHz)
frequency selection: 1.3 dB
in addition to the wave selection:
mirror frequency attenuation: 80 dB
ZF-loss:
ON-suppression: 60 dB
output level:
RDS: no
station memory: 40 AM/FM stations

New class-A circuit with optocoupler switching eliminated and crossover distortion
power supply reduces with pure power supply, dynamic intermodulation distortion 60 dB
Loudness circuit with variable characteristics
Phono MM/MC switchable
ZF-bandwidth switching
engine-driven, remote-controllable volume control
Switched outlet
for speakers with lower impedance suitable
Stereo Simulation switchable
switchable to Mono