Bose AmPlus 100 specifications
Category : Integrated amplifier
Brand : Bose
brand Bose
model: AmPlus 100
Other models from the same series:
- output power
- Stereo
- 65 W per channel at 4 Ohm s
- bridged 50 W, 8 Ohm s
- Mono
- 70 V: 100 W to 49 Ohm s
- 100 V bridged: 100 W to 98 Ohm s
- 70 V/4 Ohm : 50 W @ 70 V output to 98 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- 100 V/4 Ohm : 50 W @ 70 V output to 196 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- input sensitivity:
- 315 mV required to the amplifier in any operating mode, full control
- input attenuation: 0 dB to -8
- input/output configurations:
- 1. 2 channels (Stereo)
- 2. Mono at 4 Ohm load
- 3. Mono 70 V/100 V load
- 4. Dual Mono (1/source 2 zones)
- 5. Channel 1: 70 V/100 V; channel 2: 4 Ohm s
- input impedance:
- 32 kOhm , balanced
- 11 kOhm , unbalanced
- output impedance (Line output): 600 Ohm s
- distortion (Line output): 0,1%
- frequency response (active Equalizer bypassed)
- 4-Ohm outputs: 40 Hz - 16 kHz, ±1 dB
- 70-V-outputs: 60 Hz - 16 kHz, ±1 dB
- total harmonic distortion at rated power
- 4-Ohm outputs: 1% (40 Hz - 16 kHz)
- 70-V-outputs: 1% (60 Hz - 16 kHz)
- hum and noise
- Line outputs: 92 dB
- power amplifier outputs: 80 dB below maximum output power at 4-Ohm load,
- LED display
- voltage: front panel
- controls:
- input 1 and 2
- input attenuation
- volume-remote control
- bass level setting of 1 and 2
- input mode switch
- operating mode switch of the amplifier
- Front-panel power switch
- power consumption
- 120 V AC, 50/60 Hz, 350 W max
- 220-240 V AC, 50/60 Hz, 350 W max
- operating temperature range (passive cooling, ventilation openings at the top and bottom): -10° C to +50° C
- special features:
- volume-remote control
- turn on/Off the mute
- Clipping detector and limiter
- short circuit protection
- DC voltage protection
- Thermal limiting
- Stable at reactive load
- high-frequency interference protection
- International as safe by UL (6500), CSA (E65) and IEC (65) removed; meets EMC-CE-standards.
- Stereo
- 65 W per channel at 4 Ohm s
- bridged 50 W, 8 Ohm s
- Mono
- 70 V: 100 W to 49 Ohm s
- 100 V bridged: 100 W to 98 Ohm s
- 70 V/4 Ohm : 50 W @ 70 V output to 98 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- 100 V/4 Ohm : 50 W @ 70 V output to 196 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- bridged 65 W per channel at 4 Ohm s
- 50 W, 8 Ohm s
- 70 V,: 100 W to 49 Ohm s
- 100 V bridged: 100 W 98 Ohm s
- 70 V/4 Ohm : 50 W @ 70 V output to 98 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- 100 V/4 Ohm : 50 W @ 70 V output to 196 Ohm s
- 65 W @ channel 2 output at 4 Ohm s
- 315 mV required to the amplifier in any operating mode, full -
- 1 be separated out. 2 channels (Stereo)
- 2. Mono at 4 Ohm load
- 3. Mono 70 V/100 V load
- 4. Dual Mono (1/source 2 zones)
- 5. Channel 1: 70 V/100 V; channel 2: 4 Ohm s
- 32 kOhm , balanced
- 11 kOhm , unbalanced
- 4-Ohm outputs: 40 Hz - 16 kHz, ±1 dB
- 70-V-outputs: 60 Hz - 16 kHz, ±1 dB
- 4-Ohm outputs: 1% (40 Hz - 16 kHz)
- 70-V-outputs: 1% (60 Hz - 16 kHz)
- Line outputs: 92 dB
- power amplifier outputs: 80 dB below maximum output power at 4-Ohm load,
- input 1 and 2
- input attenuation
- volume-remote control
- bass level setting of 1 and 2
- input mode switch
- operating mode switch of the amplifier
- Front-panel power switch
- 120 V AC, 50/60 Hz, 350 W max
- 220-240 V AC, 50/60 Hz, 350 W max
- volume-remote control
- turn on/Off the mute
- Clipping detector and limiter
- short circuit protection
- DC voltage protection
- Thermal limiting
- Stable at reactive load
- high-frequency interference protection
- Internationally considered to be safe by UL (6500), CSA (E65) and IEC (65) removed; meets EMC-CE-standards.
Comment:
Comment box:
Bose AmPlus 100 relate