BASF 8425 specifications

Category : Receiver

General

connectors

Technical data

amplifier

Tuner

special features

Number of inputs:
- Phono MM: 1.5mV / 47 k643961b8da111c0a15d770a1109a86d4
- Phono Ceramic / Tape Play 1: 160 mV / 470 k643961b8da111c0a15d770a1109a86d4
- Tape Play 2: 350 mV / 470 k643961b8da111c0a15d770a1109a86d4
- Main Input: 850 mV
- Antenna MW
- Antenna FM 300 643961b8da111c0a15d770a1109a86d4 symm.
- FM antenna 75 ohm unsymm.
Number of outputs:
- Tape Rec 1, 2: 100 mV
- Tape Rec DIN: 30 mV
- 2 × Headphones (6.3mm jack, front/rear)
- 2 pairs of speakers

continuous power
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4: 2 × 25 W
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4s:
- 4 643961b8da111c0a15d770a1109a86d4: 2 × 35 W
total harmonic distortion: 0.15 by %
damping factor: 25 at 8 643961b8da111c0a15d770a1109a86d4s
frequency response: 10-40.000 Hz
signal-to-noise ratio:
- Phono MM: 60 dB
- high-level: 60 dB
sound-control: slider
- Bass: ±10 dB at 100 Hz
- treble: ±10 dB at 10 kHz
Loudness: +10 dB at 100 Hz +8 dB at 10 kHz
High Filter : -12 dB at 15 kHz
Low Filter (Subsonic): -10 dB at 50 Hz
Mute:

receiving: FM, MW, LW, KW
frequency:
- FM: 87.5–108 MHz
- MW: 520-1.620 kHz
- LW: 145-350 kHz
- KW 1: 5,8–16 MHz
frequency response: 15-15.000 Hz, +0.5 dB, -3 dB
input sensitivity:
- FM: 0.9 µV (26 dB)
- MW:
total harmonic distortion:
- FM: 0,3 % (Mono), 0,6 % (Stereo)
signal-to-noise ratio:
- FM: 60 dB (Stereo)
channel separation:
- FM: 45 dB (at 1 kHz)
selectivity:
- FM: 60 dB
frequency selection:
- FM: 1.2 dB
in addition to the wave selection:
- FM: 60 dB
mirror frequency attenuation:
- FM: 90 dB
ZF-loss:
- FM: 80 dB
ON-suppression: 50 dB
- preset memory: 5 × FM