Axton AX-80 specifications

0db377921f4ce762c62526131097968f

Tech nical data

Special equipment

The AX-80 was also available as a kit

Other models of the same series:

The AX-80 from Switzerland was built until 1996, (kit) very good sound, transparency, pressure without humming, better with Tweeter fabric domes, then high end!! One of the few bright spots in the 90s. HW

After about 30 years, the pimple foam dissolves inside: it turns yellowish, crumbles and sticks, especially to the soft one. Replacement is easily available online. Requirements for the couple: 2 m2, cost about 45 €, about 2-4 hours of handicraft work, depending on skill. Anyone who purchased and assembled the speakers as a kit at that time should be able to do it again now. Even today, there are still quite good spare parts, since the individual speakers were often installed in car soundboards, which you can find used on the net. MJ 05-2021

Manufacturer: Axton daughter of ACR
Model: AX-80
Years of construction: 1989 to 1996
Manufactured in:
Color: black
Dimensions: 280 x 950 x 300 mm (W x H x D)
Weight: 24 kg
Factory price approx.:1.000,- DM(as a kit)+ 2 x aperture 100DM

Type of construction: 3-way bass reflex floorstanding speaker
Chassis:
- Woofer: 2x 200 mm polypropylene
- Midrange: 50 mm dome !!!
- Tweeter: 19 mm titanium dome tweeter
Load capacity (nominal/musical b.): 150/200 Watt
Efficiency: 92 dB
Frequency response: 20 - 40,000 Hz
Transition ranges: 600/5,000 Hz
Impedance: 4 Ohm s

Woofer: 2x 200 mm polypropylene
Midrange: 50 mm Dome&# 160;!!!
Tweeter: 19 mm titanium dome tweeter