Impedance: Nominal value 8 ohms, minimum 5.0 ohms at 80 Hz
Crossover
1st and 2nd order filters (6/12 dB) , with phase and impedance correction, individually computer-simulated for each pair and built up only with low-loss air coils and MKP capacitors Tolerances < 1%
PCB-free construction of the individual paths with optimized star-point-shaped ground routing
Tri-wiring connection field with 3 pairs of WBT connection terminals
Design
Wall damping by steel ball-filled inner chambers
Pair matching
better than ± 0.5 dB (link./right. Speakers)
better than ± 0.5 dB (absolutely to reference speakers)
An individual measurement protocol is attached to each pair of speakers
1st and 2nd order filters (6/12 dB), with phase and impedance correction, individually simulated for each pair of computers and built up only with low-loss air coils and MKP capacitors tolerances < 1%
Platineless construction of the individual paths with optimized star point-shaped ground routing
Tri-wiring connection panel with 3 pairs of WBT connection terminals
Wall damping by steel ball-filled inner chambers
better than ± 0.5 dB (link./right. Speaker)
better than ± 0.5 dB (absolutely too reference speaker)
An individual measurement protocol is attached to each pair of speakers