Akai AM-A 90 specifications

Brand : Akai

General

connectors

Technical data

special features

Other models from the same series:10375-25135

inputs:
- Phono MC/MM switchable : (RCA)
- Tuner: (RCA)
- CD/AUX: (RCA)
- 1: (RCA)
- Tape2: (RCA)
- Video (sound): (RCA)
- V-disc (audio)
number of outputs:
- Tape1 REC: (RCA)
- Tape2 REC: (RCA)
- 2 pairs of Speakers (screw terminals)

the duration of the performance FTC in the case of total harmonic distortion (standard)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 130 W (0,05%, 20-20.000 Hz ( rms )
- 4 643961b8da111c0a15d770a1109a86d4: 2x 180 W (0,07%, 20-20.000 Hz ( rms )
- 8 643961b8da111c0a15d770a1109a86d4: 2x 140 W (0,07% 1 kHz ( DIN )
- 4 643961b8da111c0a15d770a1109a86d4: 2 x 190 W (0,07% 1 kHz ( DIN )
dynamic power:
- 8 643961b8da111c0a15d770a1109a86d4: 2x 190 W
- 4 643961b8da111c0a15d770a1109a86d4: 2x 260 W
total harmonic distortion: 0.07 to % (1khz, 8 643961b8da111c0a15d770a1109a86d4)
damping factor: 30 (1 kHz, 8 643961b8da111c0a15d770a1109a86d4)
frequency response: 10 - 80.000 Hz (+0dB, -3dB)
signal-to-noise ratio:
- Phono MM: 86 db
- Phono MC: 67 db
- CD/ Aux: 100 db
channel separation: 60 db
sound-control:
Bass: Yes (±8 db at 100 Hz)
height: Yes (±8 db at 10 khz)
Loudness: Yes
Subsonic (low-cut filter): Yes
height filter: no
Mute: Yes (-20 dB)
Direct/Line-Straight: Yes

Toroid toroidal transformer, encapsulated.
Electronic overload protection and switch-on delay via relays.
4 loudspeakers can be connected to terminals and switched in pairs.
Switch for stereo/ mono/ signal right/ signal left.
Transfer function tape to tape.
Phono input gold-plated and MC-compatible ( switchable ).
Sound control network can be switched off.
Caution: Amplifier is impedance critical, there is a risk of power amplifier failures at impedances below 4 ohms!