Akai AA-940 specifications

Category : Receiver

Brand : Akai

General

Connections

Technical data

Amplifiers

Tuners

Special equipment

  • Manufacturer: Akai
  • Model: AA-940
  • Type: Receiver
  • Years of construction: 1973 - 1975
  • Manufactured in: Japan
  • Color: Silver, housing walnut
  • Remote control: no
  • Power consumption: max. 360 W
  • Dimensions (WxHxD): 483 x 168 x 398 mm
  • Weight: 15.5 kg
  • Factory price approx.: 99'000 yen (Japan, 1973), corresponds to about 1'500 DM
  • Number of inputs: 4
    • Phono: 2.8mV
    • < li>Mic: 2.0mV
    • 2x Tape: 140mV
    • Aux: 140mV
  • Number of outputs:
    • Tape RCA: 150mV
    • Tape DIN: 30mV
    • Speakers A, B, C
< ul>
  • Phono: 2.8mV
  • Mic: 2.0mV
  • 2x Tape: 140mV
  • Aux: 140mV
    • Tape RCA: 150mV
    • Tape DIN: 30mV
    • Speaker A, B, C
    • Continuous power (with total harmonic distortion)
      • 8 643961b8da111c0a15d770a1109a86d4: 2x 66 W (RMS , 20 - 20'000 Hz, 0.5%), 2x 70 W (1 kHz)
      • 4 643961b8da111c0a15d770a1109a86d4: 2x 90 W
    • Dynamic power
      • 8 643961b8da111c0a15d770a1109a86d4: 180 W
      • 4 643961b8da111c0a15d770a1109a86d4: 270 W
    • Total Harmonic distortion: 0.03 %
    • Attenuation factor:
    • Frequency response: 10 - 50'000Hz
    • Signal to noise ratio:
      • Phono: better than -33dB
      • Mic: better than -33dB
      • Tape: better than -43dB
      • Aux: better than -43dB
    • Stereo channel separation: better than 50dB (phono, 1kHz)
    • Tone control:
      • Bass: +/-10dB/100Hz
      • Treble: +/-10dB/10kHz
    • < li>Loudness: 7dB/100HZ, 5dB/10kHz
    • High Filter : -9dB/10kHz
    • Low Filter (Subsonic): -6dB/50Hz
    • Mute: -21dB/1kHz
    • Direct/Line-Straight: no
    • 8 643961b8da111c0a15d770a1109a86d4: 2x 66 W ( RMS , 20 - 20'000 Hz, 0.5%), 2x 70 W (1 kHz)
    • 4 643961b8da111c0a15d770a1109a86d4: 2x 90 W
    • 8 643961b8da111c0a15d770a1109a86d4: 180 W
    • 4 643961b8da111c0a15d770a1109a86d4: 270 W
    • Phono: better than -33dB
    • Mic: better than - 33dB
    • Tape: better than -43dB
    • Aux: better than -43dB
    • Bass: +/-10dB/100Hz
    • Treble: +/-10dB/10kHz
    • Reception: FM, AM
    • Frequencies:
      • FM: 86..109MHz +/-1MHz
      • MW: 525+/-5kHz..1650+/-20kHz
    • Frequency response:
    • Input sensitivity:
      • VHF: 1.7µV, min. 2.8µV (IHF), stereo <20µV
      • MW: 250µV
    • Total harmonic distortion:
      • stereo: 0.6%, max. 1.5%
      • mono: 0.2%, max. 0.5%
    • Signal-to-noise ratio: 70dB
      • stereo: better than 50dB
      • mono: better than 60dB
    • Channel separation: 40dB, min. 35dB
    • Selectivity: >80dB
    • Common wave selection:
    • Secondary wave selection:
    • Mirror frequency attenuation:
    • IF attenuation: >100dB
    • AM suppression: >45dB
    • Output level:
      • RCA: 440mV
      • DIN: 80mV
    • FM: 86..109MHz +/-1MHz
    • MW: 525+/-5kHz..1650+/-20kHz
    • VHF: 1.7µV, min. 2.8µV (IHF), stereo <20µV
    • MW: 250µV
    • stereo: 0.6%, max. 1.5%
    • mono: 0.2%, max. 0.5%
    • stereo: better than 50dB
    • mono: better than 60dB
      RCA: 440mV
    • DIN: 80mV
    • Inputs for two mono microphones
    • All models of the same Series:
      • Akai AA-910
      • Akai AA-910 DB
      • Akai AA-920
      • Akai AA-930
      • Akai AA-940
      • Akai AS-960
      • Akai AS-970
      • Akai AS-980