Akai AA-1030 specifications

Category : Receiver

Brand : Akai

General

connectors

Technical data

amplifier

Tuner

special features

number of inputs:
- Phono 1+2 (3mV/50k 643961b8da111c0a15d770a1109a86d4)
- Aux (150mV/80k 643961b8da111c0a15d770a1109a86d4)
- Tape 1+2 (150mV/80k 643961b8da111c0a15d770a1109a86d4)
number of outputs:
- 2 pairs of Speakers

the duration of the performance (total harmonic distortion)
- 8 643961b8da111c0a15d770a1109a86d4: 2x 30 W (0,3%)
- 4 643961b8da111c0a15d770a1109a86d4: 2x 50 W (0,3%)
dynamic performance
- 8 643961b8da111c0a15d770a1109a86d4: 2x 40 W
- 4 643961b8da111c0a15d770a1109a86d4:
total harmonic distortion: < 0,3%
damping factor:
frequency response: 10 - 60,000 Hz (8 643961b8da111c0a15d770a1109a86d4)
signal-to-noise ratio:
stereo channel separation: > 55 db (1 kHz)
sound-control:
Bass: ±10 db at 100Hz
treble: ±10 db at 10khz
Loudness: +10 db at 100 Hz, +9 dB at 10 kHz
High Filter : -8 db at 10 kHz
Low Filter (Subsonic): -8 db at 50 Hz
Mute: Yes

receiving: FM, MW
frequency:
- FM: 88 - 108 MHz
- MW: 535 kHz - 1.605 kHz
frequency response:
input sensitivity:
- FM: 1,9 µV
- MW: 200 µV (with rod antenna)
total harmonic distortion:
- FM: < 0,2% (Mono), < 0,4% (Stereo),
- MW: < 0,6%
signal-to-noise ratio:
channel separation: FM Stereo is Better than 40db
separation
- FM: > 70 dB
- MW: > 30 dB
frequency selection:
in addition to the wave selection:
mirror frequency attenuation:
- FM: > sharpness: 65 dB at 98 MHz
- MW: > 55 dB at 1000 KHz
- LW: > 30 dB at 240 KHz
ZF-attenuation: 90 dB
ON-suppression: 45 dB