Akai A&D GX-Z9100EV specifications

Brand : Akai

General

Connections

Tech nical data

Special equipment

Other models of the same series:

Predecessor:

Number of inputs: 2
- Line (RCA) Sensitivity 70mV Input impedance 47 kOhm
- CD/DAT Direct IN (RCA) Sensitivity 240mV Input impedance 47 kOhm
Number of outputs: 2
- Line (RCA) Nominal output level 388 mV at 150 kOhm
- Headphone (stereo jack) Output power 0-1.3mW at 8 ohm

Sound heads: 3
Motors: 3
Synchronisation fluctuations: 0.04% DIN
Band types: Type I / Type II / Type IV
Frequency response:
- Type I (15-19,000 Hz +-3 dB)
- Type II (15-20,000 Hz +-3 dB)
- Type IV ( 15-22,000 Hz +-3 dB)
Total harmonic distortion: no Ang.
Signal-to-noise ratio: Type IV
- Dolby OFF: 59 dB
- Dolby B: improves 5 dB at 1 kHz, 10 dB over 5 kHz
- Dolby C: improves 15 dB at 500 Hz, 20 dB at 1 kHz
Auto-reverse: no
Title search: yes, IPLS
Dolby: yes, B+C+ HX-PRO
MPX filter: yes
Fader: no
Pitch control: no
CD synchro recording: no

3 Head, Closed Loop, Double Capstan, Direct Drive, Quartz PLL
glazed GX sound head reduces tape abrasion and hardly wears out - lifetime warranty
Recording sound head in a separate housing, is inserted next to the playback sound head and thus enables a separate azimuth setting for recording and playback
backband control
Calibration function for adjusting BIAS/level to band type
CD/DAT direct input
Switch-off fluorescent display
Copper-plated bottom plate
A-B-Memory